Saniflow E88A Automatic Hand Dryer - Metal White Porcelain
SANIFLOW® AUTOMATIC is designed to last by incorporating a vandal-proof design that includes a steel metal cover,  a tamper-proof bolts and a side-mounted heating element inaccessible through the air outlet, providing excellent performance and life with a ten years limited warranty. The architectural features include a fixed or 360ª rotating nozzle and comes in four finishes: White Porcelain, Bright, Satin, and Golden and also in a ¼“ (6mm) cast iron cover. Ideal for Heavy traffic Bathrooms.

· Warm air hand dryer.
· Sensor operated.
· Maximum robustness and power. 
· Vandal-proof.
· Suitable for very high traffic facilities.
· It normally goes along with a soap dispenser.

Components & Materials
· Steel one-piece cover with white porcelain enamel coating 1/4" (6 mm) thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow key wrench.
· Base in aluminum, 1/8” (3 mm) thick, with four 5/16” (8 mm) holes for wall mounting.
· Fire resistant plastic UL 94-VO fan scroll.
· Motor, universal, 5,500 rpm, B class, included a 4 A fuse with sealed and self-lubricated ball bearings.
· Aluminum centrifugal turbine with double symmetrical inlet.
· Waved wire NiCr heating element that incorporates a safety thermostat.
· Nozzle in chrome plated zamak, 22 μ thick.
 
Operation
Place hands under the nozzle. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.

Certificates
UL compliance with UL499 norm.

Technical Characteristics 

Specifications
Surface mounted vandal resistant hand dryer fabricated with one-piece 1/4” thick cast iron cover, with glazed porcelain coated. Aluminum back base 1/8” thick and with 4 holes for wall mounting. Cover equipped with a chromed-plated revolving 360º nozzle for hand and face drying. The dryer is activated using the chrome-plated push button, that activates an electromechanical timer with a 34 second cycle before switching dryer off automatically. Motor 1/3 hp, 5,500 r.p.m. , universal type, with a 4A fuse with sealed, self- lubricated ball bearing; The waved wire NiCr heating element incorporates a thermal limiter which will switch off by a temperature of 176 ºF (80ºC). Aluminum centrifugal turbine fan with double symmetrical inlet. Fan scroll made of a fire resistant plastic UL 94-V0. Dryer delivers 290 CFM of air at 128 ºF (53 ºC) and 5,512 LFM velocity during user controlled drying cycle. The dryer has a total power of 1,850 W with a consumption 16A. Noise level of 70 dB. Overall dimensions  11-1/8”W x 10”H x 8-1/2”D. Unit is UL listed, and /or VDE approved and CE marked.